For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
Wax in a solvent carrier liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
Silicone liquid supplied with tin catalyst and thixotrophic additive to give optimum brush-on feature. This is a three-part kit comprised of a white base rubber; and catalyst when thoroughly mixed; a thixotropic additive that will thicken the liquid silicone making it suitable for applying with a brush or spatula to vicious consistency for making glove moulds .
Product is skin and food safe
For the platinum Catalyst system this can be added either liquid, however for the silicone tin catalyst system it should be added to base paste not the catalyst.
Use: to soften silicone molds. Only a small quantity is required.
Adding above 5% will start retarding the reaction giving a longer pot life and cure time
Tin/Condensation Cured Silicone- guide
1ml added to 100ml base paste hardness reduced by 10%
3ml added to 100ml base paste hardness reduced by 30%
5ml added to 100ml base paste hardness reduced by 50%
Platinum/Addition Cured Silicone
5ml added to 100ml base paste hardness reduced by 9%
10ml added to 100ml base paste hardness reduced by 18%
15ml added to 100ml base paste hardness reduced by 25%
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition.
suitable for DIY mols, Foot and Hoof impressions.
Thermal Conductive Two-Component RTV Silicone Elastomer for Electronics Potting
Two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
