Showing 25–31 of 31 results
Silicone Putty for Dental Lab Use -Tin catalyst
£20.00 – £98.00Price range: £20.00 through £98.00(0 Reviews)
Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand and it is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.
£20.00 – £98.00Price range: £20.00 through £98.00
Silicone Putty for Dental Use
£21.00(0 Reviews)
Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand and it is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.
Silicone Putty-platinum catalyst HOOF PUTTY
£19.00 – £290.00Price range: £19.00 through £290.00(0 Reviews)
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition.
suitable for DIY mols, Foot and Hoof impressions.
£19.00 – £290.00Price range: £19.00 through £290.00
Silicone Release Wax
£5.90 – £11.50Price range: £5.90 through £11.50(0 Reviews)
Wax in a solvent carrier liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
£5.90 – £11.50Price range: £5.90 through £11.50
Silicone Thixotrophic agents
£3.60 – £6.00Price range: £3.60 through £6.00(0 Reviews)
Silicone thickening liquid
Silicone thickening liquid
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
£3.60 – £6.00Price range: £3.60 through £6.00
Soft skin safe silicone -low viscosity
£13.00 – £92.00Price range: £13.00 through £92.00(0 Reviews)
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
£13.00 – £92.00Price range: £13.00 through £92.00
thixo body moulding
£14.00 – £92.00Price range: £14.00 through £92.00(0 Reviews)
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
£14.00 – £92.00Price range: £14.00 through £92.00
