This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
Silicone thickening liquid
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both
before or after the addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
£245.00–£1,150.00Price range: £245.00 through £1,150.00
(0 Reviews)
RTV2 Condensation type tin catalyst silicone for Statue and sculpture use Mix Ratio: 100: 2 Hardness: 25-30 Shore
Silicone Base: White Curing Agent: Clear/Blue/Yellow/Orage/Green
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
Thermal Conductive Two-Component RTV Silicone Elastomer for Electronics Potting
Two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
£240.00–£1,150.00Price range: £240.00 through £1,150.00
(0 Reviews)
RTV 2 Siliocne condensation type tin catalyst siliocone for Shoe molding
Mix Ratio: 100: 2 Hardness: 20-25 Shore A
Silicone Base: White Curing Agent: Clear/Blue Cure: 4-6 hours
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition.
suitable for DIY mols,
