This material is designed to make mouldings of external body parts. Can be used for fine sculptures. Mix time: 1min :working time 2 min : set after 4 -5 min faster and regular set avilable
Alginate is for art and craft projects, life/external body casting, adult or baby hand or foot casting or craft workshops. This material is designed to make mouldings of external body parts or for fine art sculptures.
Casting Plaster for mold
water mix setting time 9-11min
Pack: 900 gm alginate 1kg plaster
Aglinate: water mix to smooth creamy conistency
This material is designed to make mouldings of external body parts. Can be used for fine sculptures. Mix time: 1min :working time 2 min : set after 4 -5 min faster and regular set avilable
Alginate is for art and craft projects, life/external body casting, adult or baby hand or foot casting or craft workshops. This material is designed to make mouldings of external body parts or for fine art sculptures.
Casting Plaster for mold
water mix setting time 9-11min
Pack: 900 gm alginate 1kg plaster
This material is designed to make mouldings of external body parts. Can be used for fine sculptures. Mix time: 1min :working time 2 min : set after 4 -5 min faster and regular set avilable
Alginate is for art and craft projects, life/external body casting, adult or baby hand or foot casting or craft workshops. This material is designed to make mouldings of external body parts or for fine art sculptures.
Fine Grade Dental Alginate which offers ease of mixing and manipulation. Set impression is flexible and all at a low cost to the dentist.
Excellent for preparing Study Models and Gypsum models for mouthguards.
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
catalyst) that can be easily mixed and applied by hand and it is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.
50ml cartridge pack
Wax in a solvent carrier liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
Silicone thickening liquid
Silicone thickening liquid
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
The two chemical components, which have no smell and are not harmful, can be combined easily with a ratio of 1:1. They have a low viscosity, allowing them to be used without needing to be processed in a vacuum chamber. The Silicone that has been treated is a slightly transparent beige or off-white color and is a highly flexible and elastic material with strong resistance to tension and tearin
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
Product Description
The two materials dispensed via syringe are combined on a 1:1 ratio and mixed syringe tip until a uniform colour is achieved. It is easy to dispense easily directly into ear.
Mixing time: 30-45 seconds.
Setting time at body temperature: 3.5 minutes (less mixing time).
Supplied as a pair of 660g tubs - one blue (base) and one white (catalyst).
Shore hardness: 30
